Skip to main content

FoxFlash ECU TCU Programmingn Tool

FoxFlash ECU and TCU Programming Tool Software and Hardware Technical Support from OBDII365.COM.

Search This Blog

Showing posts from March, 2023

Posts

Foxflash Clone Audi MED9.1 ECU on Bench

on March 05, 2023

Get link
Facebook
X
Pinterest
Email
Other Apps

Foxflash Failed to Read VW MED17.1 on Bench Solution

on March 02, 2023

Get link
Facebook
X
Pinterest
Email
Other Apps

Search This Blog

Hot Post

FoxFlash or KT200 PSA EDC17C60 Car Not Start Solution

Here comes a similar problem: I have a problem with an EDC17C60 on a 2018 Citoren Berlingo. I first read the original file at the KT200 in bench then adblue off, correction of the cheksum with winols and rewriting to the kt200 without correction of the checksum. Vehicle started up 2 or 3 times then won’t start. 2 defect codes: p151A and P3028. I retried a 2nd time doing a tprot off manual without checksum correction with winols and rewriting with auto correction of cks with kt200 and ori file and still the same. What I should do? Solution: KT200 does Tprot and checksum no problem. Do not do Manual TPROT for this ECU – KT200 / Foxflash automatically Patches. Allow the tool to do checksum, only do manual if write fails (70-90%). See KT200/Foxflash PSA EDC17C60 No Need Tprot Off Some people had the same problem. A lot is down to user error and or bad file solutions. Same with genuine equipment of same hardware. Your file may be badly modified with winols. Mo...

Foxflash Manager Tool Update to V1.3.7

The foxFlash team is proud to announce the 1.3.7 management software update on September 25, 2023. Special customized version foxFlash Manager 1.3.7 verison. through which we will 1: Improve all VR databases. 2: Personal equipment customization. 3: Customize your brand tuning logo into the tool software. 4: Special personal beta version customization and testing. 5: Private tool VR database, exclusive VR model database. 6:Special personal VR data needs to be opened on the official website and contact us through the online chat tool to assist you in updating the individual VR file database. Update method: Open foxFlash Manager software and it will automatically push the update. During this period, keep the USB connection of the device until the download is completed and reinstalled, you will see a new function.

PSA MEV17.4.2 Pinout to Foxflash and Ktag

Foxflash / KT200 will read, write and clone PSA MEV17.4.2 in both Bench and boot mode. It will do auto checksum. Foxflash MEV17.4.2 bench pinout To read and write use the following driver: → BENCH TRICORE → CITROEN / PEUGEOT → TC1767 – PSA → MEV17.4.2 Foxflash MEV17.4.2 boot pinout (Tricore version is 1796.) To read and write use the following driver: → BENCH TRICORE → CITROEN / PEUGEOT → TC1767 – PSA → MEV17.4.2 Many tools can read and write on bench without opening, ktag , kess v2 , fgtech. But many reported there is a risk to brick ecu with ktag clone if do it on bench, better in boot mode. Foxflash with no risk.

Labels

Foxflash
Foxflash EDC17C60
foxflash OTB adapter
foxflash pcr2.1
foxflash software
Foxflash update
godiag gt100
kess v2
kt2
KT200

ktag
obdstar dc706
pcmtuner
Tagflash

Show more Show less

Archive

January 20241
December 20232
November 20238
October 20237
September 20234
August 20237
July 20232
June 20234
May 20236
April 20232

March 20232
February 20234
January 202311

Show more Show less

Powered by Blogger