Foxflash Clone Nissan Renault EDC16CP33 ECU

 Foxflash read and write Nissan Renault Bosch Edc16cp33 successfully. Clone ECU on bench.

All perfectly.
The Manual says both connection for brown wire to 7 pin (300ohm) at bench box as shown in manual picture but not working because missing the ground for the bench box.

You need to add extra ground cable for bench box and then all ok.

BOSCH EDC16CP33 [ MPC561/2 ]  Renault, Nissan [Diesel] Pinout to Foxflash

ATTENTION: IF THE ECU DOES NOT ENTER BENCH MODE, CONNECT AS FOLLOWS:

To read and write use the following driver:

→ BENCH MODE

→ [brand]

→ MPC561/2 – [brand]

→ EDC16 CP33